Smart Toilet CY02 Voice Control Review

Curious whether the Smart toilet with Vioce Control AUTO Open & Close, Smart Toilet with Bidet Built In, Off-seat AUTO Flush, Heated Toilet Seat Remote Control Warm Water Sprayer and Dryer (CY02) is a good fit for your bathroom and daily routine?

Buy Smart Toilet CY02 On Amazon

Product overview

This is a feature-rich smart toilet that brings bidet functions, touchless sensors, a heated seat, and energy- and water-saving flushing into a compact one-piece tankless design. You’ll find built-in convenience like auto open/close, off-seat auto flush, and a remote control for personalized comfort settings.

Key features

Here are the standout capabilities you’ll rely on regularly: voice control auto open and close, built-in bidet with warm water, off-seat auto flush, heated seat, warm water sprayer, dryer, LED screen, foot-sensing technology, and a manual side knob for power-off flushing. These features combine to give you a hygienic, customizable, and low-maintenance solution that is especially useful in smaller bathrooms where space and leaks are a concern.

What’s included in the box

You’ll typically receive the one-piece toilet unit, remote control, mounting hardware, the power cord, and basic user documentation that covers installation, settings, and safety notes. Always confirm the exact package contents with the seller to ensure you have all necessary parts before installation to avoid surprises.

Quick specification table

Below is a straightforward breakdown of the main technical details so you can scan what matters most at a glance.

Item	Specification
Model	CY02
Flush system	Tankless dual auto-flush (1.28 GPF)
Cleaning coverage	360° powerful cleaning
Bidet functions	Warm water sprayer, ladies wash, buttocks wash
Seat	Heated, adjustable temperature
Drying	Warm air dryer
Sensors	Approach lid open, off-seat auto flush, foot-sensing flap and flush
Controls	Remote control, side knob/manual flush
Power features	LED screen, night light, power-off manual flush
Design	One-piece tankless, space-saving
Special	Self-cleaning spray bars, foot-sensing technology

Design and build quality

You’ll notice how the one-piece, tankless design keeps the silhouette compact and easier to clean than a two-piece toilet; it’s built to reduce potential leak points and save floor space. The finish and fit are made to blend into modern bathrooms while remaining robust enough for frequent use.

One-piece tankless design

Because the unit is tankless, you won’t have the bulk of a gravity tank behind the bowl, which can make installation in tight bathrooms much easier and give you a sleeker profile. The tankless construction also reduces the number of seams and potential leak sites, which is a practical advantage over traditional two-piece toilets.

LED screen and aesthetics

The LED display gives you quick visual feedback on settings and modes so you can make adjustments without guessing, and the built-in night light helps you move around the bathroom without harsh overhead lights. The style is modern and minimal, which should coordinate well with most contemporary bathroom fixtures.

Flushing performance and reliability

You’ll get a dual auto-flush system rated at 1.28 gallons per flush (GPF), designed to provide enough force for efficient waste removal while keeping water usage low. The system uses a siphon-jet style dual-flush mechanism to balance power and conservation across different flush volumes.

Dual auto-flush (1.28 GPF)

The 1.28 GPF dual-flush is intended to meet water-efficiency standards while delivering adequate flushing performance; you’ll use the lower-volume flush for liquid waste and a fuller flush for solids. In practical use, you typically notice good bowl clearing, though like any compact, water-efficient toilet some users need a follow-up flush for heavier loads.

Off-seat auto flush and manual knob

The off-seat auto-flush activates once you leave the seat, giving you a touchless end to each session that helps hygiene and convenience. For times when power is out or sensors act up, the manual side knob ensures you can still flush, which is reassuring and prevents you from being dependent on electricity.

Bidet functions and hygiene

You’ll appreciate the versatility of the built-in bidet, with warm water, multiple wash modes, and targeted sprays tailored to different needs such as ladies wash and buttocks wash. The integrated self-cleaning spray bars and nozzle design reduce maintenance and help maintain sanitary conditions between users.

Warm water sprayer and wash modes

The warm water sprayer is adjustable so you can set temperature and pressure to your liking, which makes cleaning feel more comfortable and effective. Offering separate washes for different hygiene needs means you can customize each session rather than relying on static water streams.

Self-cleaning spray bars and dryer

The self-cleaning spray bars help rinse the nozzles before and after use, reducing buildup and keeping the spray hygiene-friendly without much intervention from you. The warm air dryer finishes the process so you can feel fresh without needing toilet paper, which both improves comfort and reduces waste.

Get The CY02 Voice-Controlled Smart Toilet

Comfort features

Comfort is central to this unit: the heated seat with adjustable temperature settings, control over water temperature, and air temperature customization aim to make each visit more pleasant and personally tuned. The combination of warmth, gentle sprays, and drying lets you create a routine that fits your preferences regardless of season.

Heated seat and adjustable temperature

The heated seat warms quickly and offers settings that let you choose a comfortable level rather than a one-size-fits-all temperature that might feel too hot or too cold. If you live in a colder climate, this can be a real upgrade that makes nighttime trips to the bathroom less jarring.

Air temperature and dryer

The air-drying system is adjustable and warms the airflow to help dry you efficiently after washing, cutting down the need for paper. The option to set dryer temperature gives you flexibility to make it strong and quick or gentle and slower depending on sensitivity.

Controls and usability

You’ll find multiple control options: a remote control for distance adjustments, a side knob for manual functions, and sensors for touchless interactions; this redundancy keeps the system user-friendly for different preferences and accessibility needs. The system’s layout aims to reduce confusion by grouping common functions logically on the remote or side panel.

Remote control and side knob

The remote gives you quick access to wash modes, temperature, drying, and seat settings without leaning or bending, which is especially handy for people with mobility restrictions. The side knob acts as your backup for flushing during power outages or when you prefer a tactile control.

Foot-sensing technology and sensors

Foot-sensing flap and foot-sensing flushing allow you to be completely touch-free when operating lid and flush functions, which is great for hygiene-minded households. Sensors also ensure the lid opens as you approach and closes after you leave, reducing contact with surfaces and adding convenience.

LED screen and night light

The LED screen helps you confirm current settings at a glance, and the night light offers subtle illumination to reduce disorientation during nighttime visits. These visual cues combine to make the unit feel more intuitive and less fussy than it might sound on paper.

Installation and compatibility

Installing a tankless smart toilet involves assessing water supply routing, securing a stable electrical outlet, and confirming the rough-in and floor space match the unit dimensions; you’ll likely need a licensed plumber and possibly an electrician for the safest, code-compliant installation. If you live in an older home, check drain alignment and power availability before purchasing to avoid modifications after arrival.

Power requirements and backup operation

The CY02 runs on household power to enable heated seats, warm water, dryers, and sensors, so you’ll want an outlet near the installation location that meets local codes and GFCI protection requirements. The manual flush knob provides a reliable power-off flushing option, so you won’t be completely without function during outages.

Plumbing and space considerations

Because it’s tankless and one-piece, the footprint is compact but precise measurements are still crucial to ensure it fits your existing toilet flange and bathroom layout. Measure rough-in distance, wall clearance, and door swing to guarantee a smooth installation without surprises.

Maintenance and cleaning

Keeping the unit clean mostly requires routine wiping of the exterior and occasional cleaning of the bowl with non-abrasive products; the one-piece design makes reaching crawl spaces easier and reduces grout- and seam-related dirt traps. The self-cleaning spray bars will cut down nozzle maintenance, but you should follow recommended intervals for manual checks and cleaning.

Cleaning the bowl and nozzle maintenance

You’ll want to use gentle, pH-balanced cleaners to avoid degrading seals and finishes while keeping the bowl sanitary; harsh chemicals or abrasive brushes can shorten component life. Periodically inspect and manually clean the nozzles if you notice reduced spray pressure or deposits, following the manufacturer instructions for safe removal and reinstallation.

Filter and descaling

Depending on water hardness in your area, descaling water passages and filters will be necessary to maintain warm water flow and avoid mineral buildup. If your unit has an inline filter or water treatment recommendation, make a schedule for replacing or cleaning that filter to keep water quality consistent.

Energy and water efficiency

The 1.28 GPF dual-flush system is designed to lower water use compared with older toilets while still delivering cleaning performance, which saves you money on water bills and reduces environmental impact. The energy used by seat warming, water heating, and dryer will increase electricity usage modestly, but many users find the convenience worth the trade-off and overall consumption stays manageable.

Water-saving stats and environmental impact

At 1.28 GPF, you’ll use significantly less water per flush than 1.6 GPF models, and the dual-flush option lets you choose the lower volume when appropriate. For a household mindful of sustainability, replacing an older high-flow toilet with this model can deliver noticeable water savings annually.

Electricity usage and standby

Electric components draw power while heating and when the unit runs, and there may be a small standby draw for sensors and LED displays. Consider programming energy-saving modes if available, and be mindful that heated seats and pre-heating features will be the primary contributors to electricity use.

Noise and privacy

You’ll hear some sound from the motorized features: lid opening/closing, the wash motor, and dryer cycles produce moderate noise but are not typically disruptive. If you need near-silent operation, test in-store or ask for decibel specs, but for most households the sounds are acceptable and short-lived.

Motor and flushing noise

The flushing action and internal pump are louder than a gravity-fed tank, but still within a normal range that most users find tolerable for bathroom fixtures. If noise sensitivity is a concern, consider placing the unit in a bathroom that isn’t adjacent to quiet areas like bedrooms.

Lid opening and closing noise

The automatic open/close mechanism is convenient but produces audible motion; you can often adjust speed settings (if available) or use manual control if noise becomes an issue during late-night visits. Many people quickly adjust to the sound as part of the appliance’s normal operation.

Safety and reliability

The unit includes safety features like power-off flushing and manual knobs to ensure you’re not left without a working toilet due to an electrical issue. Built-in sensors and self-cleaning nozzles help maintain sanitary operation, but routine checks will keep moving parts reliable long-term.

Power-off flushing and manual operation

You won’t be stranded by a black-out thanks to the manual flush knob that allows you to operate without electricity, and the design anticipates such events by providing clear mechanical alternatives. This redundancy is practical and gives peace of mind in areas with frequent power interruptions.

Build durability and warranty suggestions

The one-piece construction and tankless design reduce some common failure points, and quality of components like motors and valves determines long-term reliability. Always check warranty length and coverage specifics, and consider extended protection if you want additional assurance on electronic parts.

Pros and cons

You’ll find several strong benefits and a few trade-offs to consider before buying, so weigh them against your priorities like space, water savings, and convenience.

Pros:

• Touchless features and bidet functions improve hygiene and comfort.
• Tankless, one-piece design saves space and reduces leak risk.
• Energy-efficient flushing and adjustable comfort settings.
• Remote, foot-sensing, and manual controls provide flexibility.
• Self-cleaning and dryer reduce ongoing paper use and chores.

Cons:

• Requires a nearby electrical outlet; electricity usage increases.
• Initial cost is higher than standard toilets and smart upgrades require plumbing/electrical setup.
• Some users report occasional sensor sensitivity issues that need fine-tuning.
• Compact trapway and efficient flush may need occasional double flush for heavy loads.

Comparison with conventional toilets and other smart toilets

Compared with a traditional toilet, you’ll gain touchless operation, bidet functionality, and improved hygiene without requiring a separate retrofit seat and the bulk of a tank. Versus other smart toilets, the CY02 is competitive on features like warm water, dryer, and foot-sensing, but specs like water pressure, motor durability, and remote ergonomics vary across brands.

How it compares to traditional toilets

Traditional toilets typically cost less upfront and don’t need power, but they lack the hygiene and comfort benefits of integrated bidet systems and touchless sensors. If your priority is modern convenience, decreased toilet paper use, and water savings, switching to this model delivers tangible improvements.

How it compares to other smart toilets

Compared to other smart models you’ll find similar features in higher-end brands such as customizable wash modes, heated seats, and dryers, but the CY02 balances features and price with an emphasis on space-saving tankless design. When choosing among smart toilets, compare warranty, parts availability, and real-world reviews to judge reliability.

Who should buy this

You should consider this if you want a modern, low-maintenance toilet that prioritizes hygiene, personal comfort, and water savings in a compact package. It’s particularly useful if you have a small bathroom, host guests often, or want to upgrade to a bidet without a separate seat retrofit.

Best for small bathrooms and tech seekers

Because it’s one-piece and tankless, you’ll gain a streamlined profile that fits better into tighter layouts while enjoying the conveniences of smart features. Tech-oriented users and households interested in reducing paper use will reap the most benefit.

Not suitable if…

If you lack a nearby electrical outlet or prefer a completely mechanical fixture with zero electricity reliance, this model may not be ideal for you. Also, if budget is a critical constraint, you may prefer a basic low-flow toilet or a separate bidet attachment that costs less upfront.

Troubleshooting common issues

You’ll be able to fix many frequent problems yourself, such as sensor sensitivity and small spray blockages, but keep the manual handy and contact support if electrical or mechanical faults appear. Below are common symptoms and quick fixes that you can usually try before calling a technician.

Sensor misfires or lid not opening

If the lid doesn’t open consistently, check for nearby obstructions and confirm there’s no dirt on the sensor; recalibrating or cleaning the sensor area often helps. Also ensure the unit has stable power and that any “sleep” or energy-saving modes aren’t disabling sensor operation.

Weak flush or incomplete bowl clearing

If flushing seems weak, confirm that water pressure to your home is within the recommended range and that nothing is obstructing the trap or rim jets. Hard water buildup can restrict flow, so descaling water lines and cleaning the rim can restore performance.

Dryer or warm water not working

If the dryer or water heater stops functioning, check the power connection and fuses or breakers first; sometimes a simple reset or reconnect resolves electronic issues. If power is fine but functions remain inactive, consult the manual for error codes or contact the seller for service.

Tips for getting the most out of it

You’ll extend lifespan and performance by following the maintenance schedule in the manual, using recommended cleaners, and avoiding harsh chemicals that can erode seals. Spend a few minutes customizing your preferred settings on the remote so each user has a saved profile and you don’t have to reconfigure each time.

• Register your product and keep proof of purchase to speed up warranty service if needed.
• Use water-softening solutions if you have very hard water to reduce mineral buildup.
• Have a licensed plumber confirm the rough-in and install to avoid leaks or misalignment.

Final verdict

If you want a space-saving, feature-packed toilet that improves hygiene and comfort while cutting paper use and water consumption, the CY02 is a strong contender. You’ll appreciate the versatility of touchless controls, customizable bidet features, and the practical backup of manual flushing during power outages, making it a sensible upgrade for many modern homes.

Frequently asked questions (FAQ)

You’ll find answers to common concerns below so you can decide with confidence.

Q: Does this model require professional installation?
A: It’s highly recommended you use a licensed plumber for installation due to the tankless design and electrical requirements; improper setup can lead to leaks or electrical hazards. If you’re experienced with plumbing and electrical work, follow local code and the manufacturer’s guidelines.

Q: Can the seat and water temperature be set independently?
A: Yes, the unit allows you to set seat temperature and water temperature independently so you can dial in each element for the most comfortable experience. The remote control and LED screen make it easy to switch settings and save preferences.

Q: How does the off-seat auto flush work?
A: The off-seat auto flush uses sensors to detect when you leave the seat and triggers a flush automatically, allowing for touchless operation and better hygiene. You can use the manual flush knob if you prefer or during power interruptions.

Q: What happens during a power outage?
A: During a power outage, the manual side knob still provides flushing capability, so the toilet remains usable without electricity. Electronic functions like heated seats, warm water, and dryer will be unavailable until power is restored.

Q: Is the bidet nozzle self-cleaning?
A: Yes, the CY02 includes self-cleaning spray bars that rinse the nozzles before and after use to reduce buildup and maintain hygiene. You should still inspect and clean the nozzles periodically according to the maintenance schedule.

Q: How water-efficient is this model?
A: The dual-flush system operates at 1.28 GPF, which is more efficient than many older toilet models and helps reduce your water usage over time. Choosing the lower-volume flush for liquid waste further enhances savings.

If you’d like, you can tell me more about your bathroom layout or priorities and I’ll help you determine whether this smart toilet fits your situation and which installation considerations to prioritize.

Shop Smart Toilet CY02 On Amazon

Disclosure: As an Amazon Associate, I earn from qualifying purchases.